Anchoring and Mooring

This is a great hard wearing all purpose rope. With a working stretch greater than 15% it makes superior mooring and anchor lines. It is very abras...

Often refered to as Hempex or Hardy Hemp. This very popular economically priced rope is extremely hard to tell from real hemp. It feels and looks i...

F-series cylindrical fenders have set the standard for heavy duty fenders for close to 60 years. The newest generation are made using Polyform’s un...

Zinc plated mooring pin for driving into grass verges on canals and rivers. Tip - always drive pins in at a 30-45  degree angle with the head point...

Forged brass in self colour or chrome plated. Provides a neatly proportioned and robust anchorage point. Where heavy loads are to be applied it is ...

8 mm Braided Polyester Fender Line with a hand spliced loop about 185 mm long. Overall length 1.5 m

Nylon was invented in 1935 by Wallace Carothers whilst working for DuPont in Delaware. Sadly the long standing story that the name originated becau...

For opening and closing paddles on manual canal locks. Two sizes of holes in head to allow for variation in paddle winch sizes. Less pretty than st...

Used to create moorings to prevent twisting of chains and ropes. Internal diameter of lower ring = 22 mm Length between internal bearing surfaces =...

This club hammer with it’s fibre-glass core and drop forged alloy steel head has excellent shock absorbing qualities and will withstand the harshes...

This A-series of round fenders or buoys are made in the same robust manner as the F-Series but their shape lends them to making a useful fender to ...

Rocna: Changing the Status Quo The Rocna anchor was designed by New Zealand sailor Peter Smith, who has been designing, building, and sailing boa...

These buoys by Anchor Marine can serve many purposes on board. The pick up buoy can be attached to your mooring strop to make mooring a breeze. If ...

A pressure die cast brass mooring ring plate. Available in a polished brass or chrome finish. Supplied without fixings. Length (mm) 40.00 W...

There is some debate about the preferred rope to use for anchor warps. The old school of thought was to go for nylon because of its high stretch pr...

Galvanised mooring chain with one small and one large ring which the smaller can pass through. For mooring on metal pilings to avoid rope wear. 810...

You can mark your chain with cable ties  - but they can really hurt your hands especially when its cold. Or you can paint marks on your chain - whi...

Grab mooring hook with torsion spring gate. The Wichard mooring hooks can be adapted for all types of boat hooks (not supplied). They are an econom...

NON CALIBRATED STANDARD SHORT LINK CHAIN Not suitable for use in Lewmar windlasses.

The U-Cleat Mooring Compensator features a unique removable locking mechanism that allows for fitting without a free end of the line. This gives y...

Benefiting from years of Fortress anchor research & development, the Guardian anchor offers excellent quality, performance and economy. The Gua...

These anchors are based on the original design by Richard Danforth for use with landing craft. The stock pivots so the two flukes will drop down in...

Vulcan: In the Footsteps of Rocna The new Vulcan anchor is Rocna’s first major design development since the launch of the highly successful and a...